JAI AM-800GE, User Manual

Page: 75 / 111

AM-800GE / AB-800GE
- 72 -
11.3.5 Gain Raw
Each parameter can be adjusted in the following range.
AM-800GE:
AnalogAll
：
-84
～
672 /
DigitalAll
：
-2393
～
+3379/
Digital Tap2All
：
-891
～
+1000
AB-800GE:
AnalogAll
：
0
～
672/
DigitalAll
：
-2393
～
+3379/
Digital Tap2All
：
-891
～
+1000/
Digital RedAll
：
-4533
～
17713/
Digital BlueAll
：
-4533
～
17713/
Digital Tap2Red
：
-891
～
+1000/
Digital Tap2Blue
：
-891
～
+1000
11.3.6 Gain Auto
This function works only in the FrameTrigger OFF and Pre-dump modes.
In JAI AGC Reference, the brightness level can be controlled.
In Gain Auto, there are three modes.
OFF : Gain auto is disabled
Once : The gain auto control is done only when it is enabled.
Continuous : The gain auto control is always active.
The detailed settings are:
GainAuto speed
：
Set the reaction speed of gain auto
GainAuto Max
：
Set the maximum level of the gain auto control
GainAuto Min
：
Set the minimum level of the gain auto control
Gain Auto Reference
：
Set the target level of video.
For instance, set 100% of the video as the reference
video level
ALC Channel area
：
Set the portion of the image to be used for gain
auto control
11.4. Tap Balance
The Tap control function adjusts automatically or
manually the OFFSET and the gain differences
between the left and right taps.
The sensor used in
the AM-800GE and AB-800GE divides the effective
image area into 2 areas as shown in the gain control
or black control sections of this manual.
The reference tap for all adjustments is Tap ”1”.
Tap 1 Tap 2