AD-130GE
82
Electronic Shutter
Exposure Time Abs
Pulse width control
GPIO plus Pulse width
Auto shutter
11.49 µs to 31.761ms(0.4L to 982L in 1L step)
1/13,000(2.4L) to Max. 2 sec
fine setting with GPIO and pulse width control
95L to 982L
Accumulation
LVAL synchronous or LVAL asynchronous automatic selection or manual
Control interface
Gigabit Ethernet (IEEE802.3, ATA GigE Vision Standard) 2 lines
Functions controlled via GigE
Vision Interface
Shutter, Gain, Black Level, Trigger mode, Read out mode,
GPIO setup, ROI (GenICam mandatory functions)
GigE Vision Streaming Control
Packet size, Delayed (Frame) read-out, inter-packet delay
Jumbo frame can be set at max. 16K (16020), Default packet size is 1476 Byte.
Indicators on rear panel
Power, Hardware trigger, GigE Link, GigE activity
Lens Mount
C-Mount (Rear protrusion less than 4mm). Designed for 3CCD camera
Flange back
17.526mm Tolerance 0 to -0.05mm
Operating temperature
-5
C to +45
C
Operating humidity
20 to 80% (non-condensing)
Storage temperature/humidity
-25
C to +60
C / 20% to 80% (non-condensing)
Vibration
3G (15Hz to 200Hz XYZ)
Shock
50G
Regulatory
CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS
Power
DC +10.8V to +26.4V, 8.0W (Typical, normal operation, +12VDC in)
8.7W(8 lines partial scan, +12VDC in)
Dimensions
55 (H) x55 (W) x 98.3(D) mm
Weight
340 g
Note: Above specifications are subject to change without notice.
Note:
Approximately 30 minute pre-heat required to meet specifications.
