AD-130GE
10
4. Locations and functions
4.1. Locations and functions
CCD sensor
: 1/3 inch CCD sensor
Lens Mount
: C-mount ( Note*1 )
12P Multi Connector
: DC+12V and Trigger Input
LED
: Power and Trigger indications
6P Multi Connector
: LVDS IN and TTL IN and OUT
RJ-45 Connector(GigE 1)
: GigE Vision I/F w/ thumbscrews for color
RJ-45 Connector(GigE2)
: GigE Vision I/F w/ thumbscrews for NIR
Holes for RJ-45 thumbscrews : Vertical type (Note*2)
Holes for RJ-45 thumbscrews : Vertical type (Note *2)
Mounting holes
: M3, max length 5mm (Note*3)
*
1) : AD-130GE is based on a Dichroic Prism. For optimal performance, lenses designed for
3CCD cameras should be used with this camera. Be sure to avoid lenses that contain IR filters
as this will impair the operation of the NIR sensor. Rear protrusion of the C-mount lens must
be less than 4mm to avoid damage to the prism.
*2) : When an RJ-45 cable with thumbscrews is connected to the camera, please do not excessively
tighten screws by using a screw driver. The RJ-45 receptacle on the camera might be
damaged. For security, the strength to tighten screws is less than 0.147 Newton meter (Nm).
Tightening by hand is sufficient in order to achieve this.
*3) : The tripod adapter plate MP-41 can be used with AD-130GE
Fig.1 Locations
