Page 61
•
To play CD: press the source button (4) to change to CD mode. The
CD will play. The display shows the current track and play time, and
will animate a 3-D rotating disc while the CD is playing. Note: if CD
play time is not shown, press clock set button (9) once.
•
To remove CD: open the front panel and press the CD eject button
located under the front panel. Remove CD from drive and close front
panel.
CAUTION: listen for an audible click to ensure the front
panel is closed to prevent water intrusion that could
damage your unit.
B. Changing CD Tracks and Music Seek
To advance to the next track, press the tune/seek-up button (13) once
and the track counter will increase one track. When the final track is
reached on the CD, play will resume on track #1.
•
To fast forward through tracks: press and hold the tune/seek-up
button (13) until the track counter displays the desired track, then
release the button.
•
To return to the beginning of the current track: press the tune/
seek-down button (14). Pressing it a second time within 1 second
will skip back to the previous track.
•
To rewind the current track: press and hold the tune/seek-down
button (14). The track will quickly rewind until you release the button.
C. Intro Scan, Random, Repeat
Intro Scan Mode: press intro button (21) to enter intro scan mode. The
left side of the display reads “SCN” and the first 10 seconds of each CD
track will play continuously until you press the intro button a second time,
or press either tune/seek-up button (13) or tune/seek-down button (14).
•
Random Mode: press the random button (19) to play the CD tracks
in random order. The left side of the display reads “RDM” when ran-
dom mode is enabled.
•
Repeat Mode: press the repeat button (18) to repeat the current CD
track continuously. The left side of the display reads “RPT” when
repeat mode is enabled.
