Page 39
4. Press
DISPLAY
button to save changes and recall the main
water temperature display. Note: If no button is pressed within 30
seconds, all changes are recorded and the screen automatically
returns to the standard water temperature display.
When a programmed filter/heating cycle activates, the LCD screen
displays the following message
:
1*
At any time, you may check the programming of any aspect of any filter/
heating cycle by first pressing
CYCLE
button then moving through
the menu by pressing either
CYCLE
or SELECT
button. The
programming is changed only by pressing
WARMER
or COOLER
buttons during this process.
11.3 Adjusting Time of Day
The Sentry control system remembers the time of day even in the event
of a prolonged power outage. However, it may occasionally be neces-
sary to reset the time of day. For example: if you are not in the Pacific
Time Zone you will want to reset the time for your own time zone. (The
system will automatically adjust to and from daylight savings time.) To
accomplish this, press
DISPLAY
, MODE
and DISPLAY
buttons within five seconds each. A number representing the hour will
be displayed, followed by AM or PM. The hour will advance or decrease
each time
WARMER
or COOLER
button is pressed within five
seconds. Then, press
DISPLAY
button again to display the min-
utes. Adjust the minutes as necessary by pressing
WARMER
or
COOLER
button. After 5 seconds, the display will return to normal
and save your settings.
11.4 Main Control Panel Lock
To help prevent unauthorized use of your spa, the Sentry controls incor-
porate a unique panel locking system which disables the controls on the
panel.
*Note: Number will
vary according to which
filter cycle is being
programmed.
