Page 8
•
Proper Foundation:
Consult a Structural Engineer when consider-
ing a foundation that will adequately support the spa the entire time
it is in place. Proper support is critical especially if the spa is to rest
on a second story or higher. For spas that are to rest on balconies,
roofs or other platforms not specifically tied into the main structural
support, you should consult a professional Structural Engineer with
experience in this type of application.
•
Proper Drainage:
It is extremely important to have in place mea-
sures to sufficiently handle excessive water spillage. Be sure the
flooring in which the spa rests on has adequate drainage and can
handle the entire contents of the spa. Be sure to make provisions for
ceilings and other structures that may be below the spas installation.
Areas around your spa can become wet or moist so all flooring and
subsequent furniture, walls and adjacent structures should be able to
withstand or resist water and moisture.
•
Proper Ventilation:
Proper ventilation should be discussed with an
Engineer or authority competent enough to understand the neces-
sary provisions needed to vent moist or heated air and air associated
with chemical odors outdoors. When the spa is in use consider-
able amounts of moisture will escape, potentially causing mold
and mildew over time which can damage certain surfaces and/or
surroundings.
•
Sufficient Access:
In the unlikely event that you should ever need
to access or gain entry to any portion of the spa for servicing, it is
highly recommended that you plan your indoor installation to provide
full access to the entire spa.
•
Warranty:
Damage caused by not following these guidelines or any
improper installation not in accordance to local codes or authorities is
not covered under the spas warranty. Please consult your local state
or city building ordinances.
