Jacobsen TR3 EJ Series, Safety, Operation And Maintenance Manual, Page: 3 / 186

en-3
The Jacobsen TR3 is a Diesel engined self propelled Reel mower. The hydraulic systems are for the traction
drive, the cutting unit lift and the lower and cutting unit drives and steering.
IMPORTANT: Do the maintenance indicated in this manual to make sure that the quality of cut is kept at a high
level.
This SAFETY AND OPERATORS MANUAL is part of the machine and must stay with the machine always.
Suppliers of both original and used machines need to keep the documentation that comes with the machine.
You must use the machine to cut the grass only and not for any other purpose. Compliance with the conditions
of operation, service and repair specified by the manufacturer, are understood to be part of the correct use.
ALL
operators
MUST
read through this manual and understand the Safety Instructions, controls, lubrication
and maintenance procedures.
Make sure that you obey all safety and road traffic regulations.
You must not make any changes to the machine that the manufacturer does not approve. This type of change
can release the manufacturer from the liability for any damage or injury.
Discard worn parts, taking note of the environmental result, use the systems available in the country where
the machine is used. When the machine is at its end of life, there are guidelines in this manual for the removal
of the machine from use.
Use only Ransomes Jacobsen Genuine spare parts to make sure that European conformity is controlled.
2006/42/EC
These instructions are the Original instructions confirmed by Ransomes Jacobsen Limited
INTRODUCTION 2