Jacobsen SXG323, Service Manual

Page: 222 / 230

CHAPTER 7. ASSEMBLY INSTRUCTION
41
7
9) Attach the FRAME/REAR COMP (12) to
FRAME/SIDE/LH COMP (10) and
FRAME/SIDE/RH COMP (11), and tighten 4 pcs of
BOLT/SP/7T (34).
10) Attach the PLATE/COVER/FRONT COMP (19) to
FRAME/SIDE/LH COMP (10) and
FRAME/SIDE/RH COMP (11), and tighten 2 pcs of
NUT/WASHER/M8 (42).
11) Attach the top hole of CYLINDER/L SET (2) to FRAME/UPPER ASSY (8) by the PIN/16X65 COMP (24) and
PIN/SNAP (25).
12) Attach the lower hole of CYLINDER/L SET (2) to hole of STAY/CYLINDER COMP(21) by the PIN/16X65 (23),
WASHER/M16 (38) and PIN/COTTER (41).
Note:
It is possible to attach the PIN/16X65 (23) and PIN/16X65 COMP (24) from either left side or right side.
Note:
Attach the PIN/16X65 COMP (24) as shown in the left illustration, and make sure that the CYLINDER/L SET(2) does not
rotate when it moves.
Note:
If the door of collector ASSY does not close completely
after attaching the CYLINDER/L SET (2), adjust the
length of NUT/CYLINDER (2-2) by loosening NUT (2-1).
Note:
The attaching hole of STAY/CYLINDER COMP (21) is
different from the kind of the lawn mower.
No. PARTS NAME QTY
10 FRAME/SIDE/LH COMP 1
11 FRAME/SIDE/RH COMP 1
12 FRAME/REAR COMP 1
34 BOLT/SP/
䠓
T/M
䠌
8x40
8
19 PLATE/COVER/FRONT COMP 1
40 NUT/WASHER/M
䠔
2
No. PARTS NAME QTY
2 CYLINDER/L SET 1
24 PIN/
䠍䠒䡔䠒䠑
COMP
1
25 PIN/SNAP 1
23 PIN/
䠍䠒䡔䠒䠑
COMP
1
38 WASHER/M16 1
41 PIN/COTTER/
䠏䡔䠏䠌
1
SXG19, SXG22 A
SXG323, SXG326 B
No. PARTS NAME QTY
6 SWITCH/LEVER ASSY 1
33 BOLT/SP/M
䠌䠒䡔䠎䠌
1
28 HARNESS/L ASSY 1