Jacobsen SXG323, Service Manual

Page: 213 / 230

SERVICE MANUAL FOR SXG323&326
32
* In case of not use of the collector base (OPT), follow the instructions below.
a. If the hoist is not available;
1) Set wood pieces and stands as shown in illustration below, and put the container on the stands with wood
pieces.
2) Move lawn mower backward, and attach the UPPER FRAME SETS, 81 and 82 to the
FRAME/COLLECTOR SET, 1, by 4 pcs of PIN (16x65) COMP and 4 pcs of hair pin.
* If it is difficult to insert pin (16x65) COMP in the hole, try to reinsert the pin (16x65) COMP while
adjusting the height of stands with wood pieces and inserting the stick or screw driver in the hook of
UPPER FRAME SETS, 81 and 82.
b. If the hoist is available;
1) Set wood pieces under the container, and hang them by slings via these wood pieces. Make sure the
balance of container.
2) Set a wood piece between the linkages and upper frame sets, and hang it by sling via the wood piece.
Make sure the balance of container.
3) Lift up the container by hoisting the balance with slings. Attach the UPPER FRAME SETS,81 and 82 to
the FRAME/COLLECTOR SET, 1, by 4 pcs of PIN (16x65) COMP and 4 pcs of hair pin.
* If it is difficult to insert pin (16x65) COMP in the hole, try to reinsert the pin (16x65) COMP while
swinging the container and inserting the stick or screw driver in the hook of UPPER FRAME
SETS, 81 and 82.