JAC J5, Owner'S Manual

Page: 65 / 166

Keyless starting system (if
equipped)
Function of the keyless starting
system lies in starting the engine via
direct rotating the knob on the ignition
switch without inserting the key when
the vehicle is in the unlocking condition
for the anti-theft system and the
intelligent key is in the sensing area
inside the vehicle.
LOCK
The position is applied to engine
flameout and steering wheel lock-up.
58
ACC
When the knob is located at this
position, the audio system, cigar
lighter and vehicle-mounted direct
current
(DC) power supply are
available. It is not recommended to
use the above electrical accessories
when it is not started to avoid battery
under voltage.
ON
When the knob is rotated to this
position, corresponding indicator lamp
on the instrument panel will light up
and get ready for inspections. At the
same
time, all equipments and
components on the vehicle are
stand-by.
If the engine is not started, do not
maintain the knob at "ON" position for
a long time for this may lead to self
discharge, ignition system damage and
even battery under voltage.
START
This position is applied to engine
ignition only. Rotate the knob to this
position for engine start. After starting
the engine, release the knob and it
returns to "ON" position automatically.
Engine start-up procedures
1. Open a vehicle door with the
intelligent key and then take the key
into the vehicle.
2. Depress the brake pedal and make
sure to maintain the shift handle at P
gear position or neutral position.
3. Ensure the intelligent key is in the
effective range. Press down the
ignition knob on the ignition switch and
rotate it clockwise.
4. When the ignition knob is rotated to
"ON" position, make sure that indicator
lamps on the instrument panel can light
up or go out normally.
5. Rotate the ignition knob to "START"