JAC J5, Owner'S Manual

Page: 146 / 166

soon as possible.
After wheel replacement, you need to
place the removed flat tire on the
spare tire mounting bracket in the
above-described procedure. Place the
jack, its handles and other tools onto
their original positions.
Circuit fuse
To avoid damage to electrical system
due to short-circuit or over-load, each
circuit is equipped with a fuse. If there
is a blown fuse, contact the JAC
authorized after-service center for
troubleshooting, repair or replacement.
If replacement is necessary, use a
fuse with the same blow-out current
as that of the replaced one.
At the replacement of fuse,
choose a fuse with the same
amperage or lower amperage
than that of the replaced one.
Never use a fuse with a blow-out
current larger than the rated value
or a similar substitute (e.g. wire or
platinum wire). Otherwise, it may
result in short-circuit or even a
fire.
To check if there is a blown fuse,
follow the procedure below:
1. Stop the engine. Turn off the
electrical system.
2. Open the fuse box. Pull outward
fuses from the box (there is a small
clamp). Carefully check each fuse.
3. If one fuse is blown, the others shall
also be checked.
139