JAC J5, Owner'S Manual

Page: 63 / 166

"ACC"
If the ignition key is at the ACC
position, the on-board audio system,
cigarette lighter and DC power supply
will be put into use. It is not
recommended to use the battery until
the engine is started, in order to
prevent excessive discharge of the
battery.
"START"
The START is the engine starting
position. Turn the ignition key to the
START position to start the engine.
When the engine is started, you need
to release the ignition key. The ignition
switch will return to the ON position.
If the ignition key inserted into the
LOCKpositioncannotbeturned,youneed
to slightly turn the steering wheel. The
cause for this problem may be that the
steeringwheellockisactivated.
"ON"
When the ignition key is at the ON
position, the indicator lamp on the
instrument board will come on for test.
At the same time, all components and
components are ready for work. The
ignition key shall be kept at the ON
position when driving.
If the engine is not started, never keep
the ignition key at the "ON "position. It
will lead to spontaneously discharge,
which may damage the ignition system
and make the excessive discharge of
the battery.
Ignition switch
Ignition switch position and
function
The ignition switch is located at the
right side the steering column and
below the steering wheel. It has 4
positions as follows:
"LOCK"
The ignition key will not be inserted or
pulled out until the switch turns to
LOCK.Whenparkingandlockingyour car,
you need to slightly press and turn
counterclockwise the key. Then, pull out
th e key from the LOCK position. In
such case, the steering wheel is
locked to prevent theft.
56