JAC J5, Owner'S Manual

Page: 143 / 166

4. Place the jack
Before replacing tires and installing
anti-skid chains, place jack at proper
location as shown in the above figure
to lift your car, in order to avoid
damage to your car.
5. Lift your car
Connect the nut wrench, jack and its
extension rod as shown in the figure
above. Turn clockwise the nut wrench to
lift your car. Before lifting your car,
re-check if the jack is arranged in a
correct position, in order to prevent your
car from sliding down from the jack. For
soft ground or sand, you need to place a
proper plate, brick, flat stone or the like
under the jack to prevent the jack from
subsiding.
Fully lift your car to install the spare tire.
Ground clearance for installing spare tire
shall be larger than that for removing old
one.
○ Always use original JAC jack for
tire replacement only.
○ Place the jack on a hard horizo
-ntal road.
○ Carefully use the jack. Make sure
that there is no person beneath or
inside your car.
○ Lift your car until there is a small
ground clearance. A too large
ground clearance may be hazar
-dous.
○ It is very hazardous for the jack
to skid. Never keep your car lifted
for a long time. Never shake your
car when being lifted.
136