JAC HFC1035KD, Owner'S Manual

Page: 43 / 80

5. Do not leave the foot on the clutch pedal during driving, or partial separation
will occur and this will bring about premature wear of the clutch discs.
6. Before and after backing, the vehicle must be stopped still before shifting the
lever to the Reverse gear or shifting back to Gear 1 position.
80
OWNER 爷 S MANUAL
JAC High end Light Trucks
7. When going up a slope, to avoid engine overload, the gearshift lever should
be moved to the low speed in time before the engine begins to load up and
slow down.
8. When going down a slope, the gearshift lever should be moved to low speed
so as to have the braking effect from the engine deceleration.
81