Careful driving and maintenance during the run-in period will play a crucial role in improvement of the
performance and service life. So, the followings must be strictly abided by during the initial run-in peri
鄄
od of 3000km:
1. During the initial 3000km driving, the vehicle speed shall not be more than
70% of the max. engine speed. Attention should be paid to the tachometer dur
鄄
ing driving to avoid engine over speed running.
2. Try to avoid engine over speed running, abrupt startup or unnecessary e
鄄
mergency braking.
3. It is necessary to have the engine in idle running before driving each time,
until it comes up to the normal working temperature.
6
OWNER
爷
S MANUAL
JAC High end Light Trucks
Vehicle operation and management
All the components and devices of the vehicles shall be checked according to
the requirements in sections of "Controllers and instruments" and "Driving";
Maintenance
For driving safety, vehicle reliability and good performance, the requirements in
the section "Maintenance" should be followed in check and adjustment.
Note
院
1. No refitting or unauthorized installation of any equipment is allowed on JAC
vehicles. Our Company will not be responsible for any losses due to unautho
鄄
rized refitting or installation of any equipment!
2. If any problem occurs during the use of our products, make sure to have
them sent to the specified JAC service station for maintenance; please see clearly the genuine parts of JAC vehicles if
any parts need to be changed.
3. Correct run-in of new vehicle has much to do with longer service life, reliability and economy. It is specified that new
7
Summary of Contents for HFC1035KD
Page 5: ...5 Information about new vehicles...
Page 9: ...Controller and instrument 13...
Page 24: ...CD and Radio 43...
Page 53: ...Repair and maintenance 101...