Proper driving and maintenance will prolong the vehicle's service life, but also improve the economy of
fuels and oils.
Preparations before startup
1. Push the parking brake handle down to the end.
2. Put the gearshift lever in the neutral position.
72
OWNER
爷
S MANUAL
JAC High end Light Trucks
3. The gear shift chart on the lever handle.
Engine startup
Turn the start switch to "ON" position, check if the horn and the instruments in
the panel are working properly, if the turn signal lights and brake lights are OK,
and if the door mirrors are correct in angles and positions.
1. Normal startup
Turn the key to START, and the engine will get started, immediately release the
clutch pedal. Keep low speed running, do not step hard on the accelerator.
2. Startup in winter
If one startup fails in the normal way, start the engine for the second time after two minutes. When it is very cold and the
above method does not work, the following steps can be taken for startup:
a. Use hot water as the cooling water. Open the drain cock when adding hot water, and do not close it until hot water
flows out.
b. Heat up the engine oil to about 80
益
-90
益
before adding it to the oil sump.
73
Summary of Contents for HFC1035KD
Page 5: ...5 Information about new vehicles...
Page 9: ...Controller and instrument 13...
Page 24: ...CD and Radio 43...
Page 53: ...Repair and maintenance 101...
