Deflection to be the
specifide value
Engine compartment
1. Check if the engine oil level is OK.
2. Check if the fan belt tension is correct.
The fan belt tension should be often checked, in the following way: pressing the
belt with 70-100N force to see if its deflection is the specified value. If the fan
belt is over-tightened, the pump bearing and the alternator bearings will be dam
鄄
aged too early; if it is too loose, then belt will have slip, and the cooling effect will
go down, hence, the engine will be overheated.
68
OWNER
爷
S MANUAL
JAC High end Light Trucks
3. Check the coolant level.
Check the radiator and the coolant level in the auxiliary water tank. Add some
more coolant if the level is below the lower limit. Coolant shall not be added
above the upper limit.
Check the sealing of the injection port cover.
After the engine is started
1. With the engine running, check if the alternator indicator light and the oil
pressure indicator light are off.
69
Summary of Contents for HFC1035KD
Page 5: ...5 Information about new vehicles...
Page 9: ...Controller and instrument 13...
Page 24: ...CD and Radio 43...
Page 53: ...Repair and maintenance 101...
