Right and left side boards
1. Release the lock knuckles of the rear board.
2. Move the fastened handle leftward before putting down the vertical lock out
鄄
wards to release it.
3. Lift up the hook handle on the front end of the side board to release the front
hook.
4. At this time, the front end of the side board is still fastened by the board
clamp. Pull out the board clamp with force to let free the side board.
5. To close the side board, securely lock up the front end of side board with the
hook handle, and put it into the vertical lock of the rear board before fastening it
with the handle.
32
OWNER
爷
S MANUAL
JAC High end Light Trucks
Outer lights
Front:
1.Front turn signal lamps;
2.Fog light;
3.Front side-marker light;
4. Headlight.
Rear:
The rear light set is installed in the position shown on the left figure, with the
following:
1. Back-up light;
2. Turn signal lights;
3. Brake lights;
4. Rear side-marker light;
5. After-reversion reflector.
Turm signal light
Brake light
Rear light
Rear fo
g light
Revers
e light
Non-return reflector
33
Summary of Contents for HFC1035KD
Page 5: ...5 Information about new vehicles...
Page 9: ...Controller and instrument 13...
Page 24: ...CD and Radio 43...
Page 53: ...Repair and maintenance 101...
