JAC HFC1035KD, Owner'S Manual

Page: 41 / 80

4. Tighten the seat belt.
Engine stopping
Turn the start switch to "ACC" (accessories) or "LOCK"(lock firm) position.
76
OWNER 爷 S MANUAL
JAC High end Light Trucks
Parking
1. Check if the light control switch and the turn signal light switch are in off pis 鄄
tons. The headlights, turn signal lights and small lights can still be operated
even if their start switches are in off positions.
2. To have the parking brake work reliably. If the vehicle is to be parked on a
slope unattended, some wheel wedges must be put under the wheels.
If the vehicle must be parked on the road for some reason, it should be parked
near the road curb instead of on the roadbed. If the vehicle breaks down in the
middle of a road in a special case, a warning sign should be placed 200M in
front of and behind the vehicle respectively.
Try to avoid stopping on slopes. If necessary to stop on a slope, the parking
brake handle should be pulled up completely, and shift into low speed. Put tri
鄄
angle pads or stones behind the wheels to prevent back sliding. Parking on a
slope should have the parking brake work reliably, with the emergency lights
on.
77