JR_EYE-02.ENG.MAN.Manual.16.A
- 6 -
GARAGE
This profile is suitable for installation inside your garage. It is simi-
lar to the HOME profile. Additionally, the GARAGE profile provides
a 30-second entrance delay. It allows you to open the garage or
home entrance door first and switch the camera to the SLEEP
mode during this delay.
CARE
Profile CARE has been especially designed for monitoring small
children and elderly or disabled people.
The camera used in the CARE profile allows
the user to leave its home, stay in a short
distance away from the home and watch its
sleeping baby or ill grandmother etc.
at the same time.The camera is activated
by any movement or by a PANIC alarm
(triggered by a personal wrist button)
The internal acoustic camera signals are disabled in the CARE profile. Also the TILT detector is bloc-
ked to allow the camera manipulation.
SHOP
The most powerful profile is SHOP. In this profile, all detectors are
active, including the permanent process of “Motion in Picture” dete-
ction. This profile offers the highest quality of permanent monitoring;
consequently it is the highest energy consumption profile.
This profile perfectly fits places requiring a whole day monitoring and
a full protection during the night time, such as shops, office corridors
and reception areas, etc.
The default profile is HOME. For switching the profile use SMS command PROFILE (For details see chapter
4.2). You can switch mode and make some additional sensor customization also in JabloTool software.
3.5 Detectors
The EYE-02 camera integrates a wide range of detectors. This sophisticated solution of combining various
types of detectors enables the user to protect the desired area from a wide range of threats. This chapter
briefly describes individual detector principles necessary for a correct setting of detection.
PIR motion detector (PIR)
PIR detector (Passive InfraRed sensor) or a Human Body Detector is the most common type of professional secu-
rity systems detectors. PIR can detect even very small changes of temperature differences in front of the camera.
Motion-In-Picture detector (MIP)
The key principle of this detector is derived from a professional surveillance camera system. It analyzes the
scene and detects any change in the picture permanently.
A sophisticated digital algorithm provides an excellent resistance to false alarms caused by non-essential
changes in pictures (getting dark, switching on the street lamps, etc).
The user can simply mask-out (hide) a part of a picture in order not to detect changes in this part (mask of
the street traffic, etc.) and set the sensitivity according to the size and speed of change in the picture.
As the DSP method is energy demanding, MIP is usually activated after some alert from the PIR detector.
Glass-break detector (GBS)
Glass-break detector uses a digital signal analysis from the microphone and is able to detect a characteristic
sound of the window breaking up to 9 meters away.
The Door-Opening-Detection is a special type of the detection that uses the acoustic signal filtering. It allows
detection of the infrasonic wave (pressure wave) caused by a door or window opening.
GBS sensor can be used for indoor installations only.
