JR_EYE-02.ENG.MAN.Manual.16.A
- 11 -
Example of Events history viewed by the JabloTool software:
Jablotool Desktop - events list
There are many types of event records. The most important are ALARM reports, which are reported
to the contacts from the contact list immediately. Other types of records are the ALERT records
(similar to ALARM, but ALERTs are not reported to the contacts) or some technical reports (Example:
information about the AC power failure).
4.4 Video Record Setting (Available through JabloTool only)
The EYE-02 camera allows a detail setting of all important parameters for collecting video records under
many conditions.
Parameter
Settings
Description
Snapshoot interval
from 20 frames per sec, to 1 frame
per 5 sec
The frequency of snapshots. Higher fre-
quency increases the video record file size.
After ALARM keep on
recording video for
(0 sec, 5sec, 10sec ,... 2 min, 5 min,
10 min)
Default value is 20 seconds
Camera keeps video recording for some
time period after an ALARM.
Save pictures only when
a motion is detected
Next snapshot (frame) will be saved to the video record file only if a change there
has been detected a changing to the previous snapshot. If the pictures are almost
the same, it will not be stored. This setting SIGNIFICANTLY reduces the video file size.
Image size
160x120, 320x240, 640x480 pixels
Default value is 320x240 pixels
Image resolution in pixels. Higher resolution
increases the quality of recorded pictures
but it also increases the size of video files
and lengthens the time for transfer it via
GSM network.
Image quality
5 levels of JPEG compression
Level of JPEG compression. Higher compres-
sion reduces the file size and slightly decrea-
ses the detail resolution in the picture.
Filter fluorescent lamps
(OFF, 50Hz, 60Hz), default OFF
If the scene is illuminated by standard
fluorescent lamps, this will filter undesirable
lamp blinks. Set the standard AC power
frequency in your country.
