JR_EYE-02.ENG.MAN.Manual.16.A
- 5 -
3.3 CONFIG Mode
CONFIG mode allows the user to change camera’s settings.
To enter the CONFIG mode by the remote control, press
and
buttons simultaneously – red and green
LED lights on the front panel will start to blink slowly at once.
From the CONFIG mode is possible to switch to other special modes (ENROLL, TEST, REPORT, USB).
MODE
DESCRIPTION
COMMAND
ENROLL
In the ENROLL mode, the camera allows to enroll new external wireless
devices such as remote controls, detectors, sirens, etc. Also a new contact
– phone number can be enrolled in this mode by just a simple call to the
camera. ENROLL mode is terminated automatically after one new items has
been enrolled.
TEST
TEST mode is a special mode for testing functionality of all detectors
without causing number of unwanted alarm reports. Camera beeps
and blinks after activation of any sensor.
REPORT
In the REPORT mode, the camera sends a special report to all contacts
(call, MMS etc.) according to the camera settings.
Example of an SMS from the camera: Camera EYE-02 reports:
User originated camera test External wireless device RC-80(1),
Time:13/11/2008 11:33:49.
press
and
buttons
simultaneously for about
4 sec
USB
In this special mode camera behaves as a standard USB flash disk. It
allows to access files on the SD memory card without installation of
a special camera driver to PC.
Shortly power button
on camera back panel with
connected power or USB
cable
To protect the camera’s safety, special modes will be closed automatically after a 5 minutes timeout
and the camera returns to CONFIG mode.
3.4 Profiles
The EYE-02 camera allows fast and simple setting of all necessary detector parameters by selecting one of
the pre-defined PROFILEs. These profiles are suitable for most camera applications. If necessary, the profile
may be further adjusted by the user.
HOME
HOME profile has been designed for camera installation inside
a building (house, flat, office). During the WATCH mode, there are
no movements of people, no wind drafts, no significant temperatu-
re changes, or loud noises etc. expected.
The TILT detector is active also in the SLEEP mode to protect the
camera against an unwanted manipulation.
OUTDOOR
OUTDOOR profile fits best camera installation outside your home.
The camera significantly reduces its detectors’ sensitivity in the
OUTDOOR profie as there are many possible sources that could
cause a false alarm triggering (sunshine, animals, street noise,
wind, etc.).
For outdoor installation see chapter 5.9.
