JR_EYE-02.ENG.MAN.Manual.16.A
- 12 -
Parameter
Settings
Description
Brightness compensation
+/- 2EV, with step 0.5EV, default 0
A camera calculates the best brightness of
pictures automatically. This setting allows
changing the pre-set level of brightness.
Expected speed of the
objects (Shutter speed)
(fast, normal, slow), default normal
Default setting is NORMAL. Set of FAST
in case there may be some fast moving
objects in front of the camera (cars, running
persons, etc.), SLOW is suitable mainly for
door control and dark rooms.
Disable build-in infrared
lamp
An internal IR lamp is automatically switched on when the lightness of the scene is
too low for normal camera function. This option disables this automatic function
and it is mostly used if the illumination is done by an external lamp.
Insert date and time into
the picture
A small timestamp will be inserted into the left top corner of the picture. This helps
to determinate exactly the time of the snapshot.
Capture video during
PIR or MIP activity
in SLEEP mode
The video recording continues also in SLEEP mode if there is some activity detected
in front of the camera. This is well usable for shops, petrol stations and other places
where permanent watching is required.
Send video as separate
JPEG pictures
5 JPEG pictures will be sent by e-mail instead of AVI video files.
Please consider that even though the size of MMS and email is limited to 300 kB and 1 MB respecti-
vely, sending such MMS or e-mail may take up to several minutes according to your local network
conditions. To reduce the file size and fasten sending you can choose a lower image resolution,
snapshot interval or recording duration.
Jablotool DESKTOP - video recording configuration
4.5 GSM Network Setting
The EYE-02 camera needs correct settings of some GSM network parameters. These parameters depend on
the country you live in and on the GSM network you use.
The EYE-02 camera can automatically adjust the correct setting for most of GSM networks. In case there are
some specific settings of your GSM network, which you got from you GSM network operator, you can confi-
gure it manually in JabloTool, Device configuration, GSM network folder.
Please contact your GSM service provider for detail parameters setting.
