JR_EYE-02.ENG.MAN.Manual.16.A
- 8 -
If there are no phones saved in the contact list (aft er installing a new EYE-02 camera or aft er using the
factory reset functi on), the camera switches automati cally to ENROLL mode (aft er power on) and waits for an
incoming call.
Camera sends e-mails with the reply address [email protected]. Please check your e-mail
client SPAM fi lter to accept e-mails from this address.
3.7 SECURITY SETTINGS
Camera is not protected by any password in the factory setti ngs.
Without setti ng a password the camera processes incomming SMS messages or receives calls only from
phone numbers stored in Contacts. It is possible to setup two passwords. For password setti ng or changing
use JabloTool or confi gurati on SMS commands (chapter 4.2).
Remote Access Password
This password protects any access to your camera (SMS, JabloTool).
If it is used, camera process SMS messages that begins with the password from any phone number.
Configuration Password
This password protects camera confi gurati on. (The contacts are not part of confi gurati on.)
Password can contain 4-31 characters, allowed symbols are 0..9, a..z, A..Z. Password is not case
sensiti ve.
Protect your camera by setti
ng the Remote Access Password.
4. Camera Configuration
4.1 Set-Up and Configuration via PC
The most convenient way to set-up the EYE-02 camera and confi gure its parameters is by using PC and the
JabloTool soft ware.
JabloTool
DESKTOP
is available as a soft ware on the installati on CD included in the camera package.
JabloTool
WEB server
works remotely with the camera from
www.jablotool.com
.
Functi on of both JabloTool versions are the same, the only diff erence is in the method of connecti on to the
camera -
JabloTool WEB
requires a connecti on to the internet and establishes a cable-free connecti on with
the camera,
JabloTool DESKTOP
interconnects the camera with the PC by a USB cable. The advantage of the
USB connecti on is a faster data transfer from the camera.
JabloTool DESKTOP
Load the installati on CD to your computer, start
the
“INSTALL.EXE”
and follow the program
instructi ons.
USB Cable
EYE-02 connecti on wit JabloTool DESKTOP
Do not connect the EYE-02 camera to the USB on your computer unti l you have fi nished installing
the JabloTool soft ware from the CD!
The latest version of the installati on soft ware can be downloaded from
www.jablotool.com/download.
Turn the camera On and connect it to the computer by the USB cable. Wait unti l the
operati ng system recognizes the camera. Click on the JabloTool icon on the desktop than
to load the program and follow instructi ons on the screen.
JabloTool
The maximum length of a USB cable is usually 5 meters. If your EYE-02 camera is too far, you may
need to remove it temporarily from its locati on or bring your PC nearer.
