JR_EYE-02.ENG.MAN.Manual.16.A
- 10 -
COMMAND
DESCRIPTION
SwitchX
_______
SwitchY
If the camera is enrolled to a wireless relay, this command switches its programmable out-
put. Parameters are ON or OFF. If you would like to make a pulse on the output, send the
command ON <time in seconds>.
Please see chapter OASiS wireless devices.
Example: SwitchX ON
Switches on the PGX output of the wireless relay
.
Example: <Configuration Password> SwitchY OFF
Example: SwitchX ON 30
Switches on the PGX output for 30 seconds
CONFIG commands
CONFIG commands change the EYE-02 camera settings. Camera confirms configuration commands with an
SMS.
COMMAND
DESCRIPTION
CONFIG PROFILE
<profile>
Profile setting, <profile> is
HOME
,
OUTDOOR
,
GAR AGE
,
SHOP
or
C ARE
Example:
CONFIG PROFILE SHOP
Camera switches to the profile
SHOP
Example:
<Configuration Password> CONFIG PROFILE HOME
Camera will switches to the profile
HOME
CONFIG CONTACT
Add a new contact.
Example:
CONFIG CONTACT [email protected]
The e-mail address [email protected] will be added to the EYE-02 camera
contact list, ALARM reports will be sent to this e-mail address including the video
records.
Example:
<Configuration Password> CONFIG C555 888 770 551
The phone 555 888 770 551 will be added to the EYE-02 camera contact
list. ALARMs will be reported to this phone number in accordance with default set-
tings via a voice call and anMMS.
CONFIG LANG
<language>
Changes the EYE-02 camera language settings.
Camera sets the language according to the inserted SIM card automatically. If the
SIM card language is not installed in the camera, English texts remains.
Example:
CONFIG LANG GER
changes the default language to German.
Possible languages: ENG, GER, SPA, FRE, FIN, SWE, NOR, SQI, ARA, CZE, DAN, GRE,
HRV, HUN, ITA, DUT, POL, POR, RUM, RUS, SLK, SWE, TUR.
For the list of currently installed languages in your camera send an SMS: HELP LANG
Example of an answer from the camera:
Camera EYE-02 help: LANG ENG, CZE, GER, SPA, FRE
CONFIG DELAY
<time>
Changes the Exit delay timer setting, <time> is time in seconds.
Example:
CONFIG DELAY 25
sets the exit delay to 25 seconds
CONFIG POWER
<mode>
Changes the power mode, <mode> can be NORMAL or BATTERY.
Example:
CONFIG POWER BATTERY
changes power mode to BATTERY mode
CONFIG DATE
Sets date and time in format YYYY-MM-DD HH:MM:SS.
Example:
CONFIG DATE 2009-10-24 08:34:02
CONFIG ACCESS
Sets or changes the Remote Access Password.
Example:
CONFIG ACCESS 1234
for setting the password
Example:
1234 CONFIG ACCESS 5555
for changing the password
CONFIG PASSWORD
Sets or changes the Configuration Password.
Example:
CONFIG PASSWORD 5555
for setting the password
Example:
5678 CONFIG PASSWORD 8888
for changing the password
When the camera is switched to other language than English, it still accepts English commands as
well.
4.3 Event Reports
Every event detected by the EYE-02 camera is recorded into the camera’s memory.
The event record consists of the date and time mark, detail description of the event including its source and
a video record.
