JR_EYE-02.ENG.MAN.Manual.16.A
- 4 -
3. Camera Function
3.1 Working Modes
The EYE-02 camera has three main working modes:
SLEEP
,
WATCH
and
CONFIG
.
Mode
Descripti on
Butt on on
the Remote Control
SLEEP
SLEEP mode is a stand-by mode of the camera. The camera doesn’t
detect any movement in the targeted area and the major detectors
are disabled. The only acti ve detectors are those that protect camera
itself against an unwanted manipulati on by an intruder.
WATCH
In WATCH mode camera guards fully the targeted area, all detectors
are acti ve.
CONFIG
CONFIG mode allows user to change camera setti ngs and switch the
camera to other special modes (ENROLL, TEST, USB).
and
together
The chosen camera mode is terminated by switching to a diff erent camera mode.
3.2 Remote Control
The package contains a wireless remote control (RC-86 type), which can be used to
switch between camera modes.
Changing a mode by using the remote control is signaled both by the LED lights on
the camera front panel, and by an acousti c signal. Meaning of the LEDs and acousti c
signals is as follows:
Remote control
Remote control navigati on
WATCH
ENROLL
TEST
REPORT
SLEEP
CONFIG
Camera Mode
LED lights signaling
Acousti c signal
WATCH
Lights are Off .
One long beep
SLEEP
Green light is permanently On.
Two long beeps
CONFIG
Red and Green lights blink
slowly together.
Three long beeps
ENROLL
Red and Green lights swap
blinks slowly.
One short beep
ERROR
Red light is permanently On.
Four short beeps
The progress of the camera startup and shutdown and also the USB mode is indicated by fast green light
fl ashing. Entering USB mode is signalized by four long beeps.
