SeapiX
–
Installation Manual
SSD-C-1306 Ed. A
–
01/2020
50
Set the following parameters:
•
Parity
: from None, Even, or Odd
•
Stopbits
: from 1.0 or 2.0
•
Standard
: electric standard for serial output (RS232)
•
Baudrate
: from 4800 bauds up to 115200 bauds
When
Ethernet
physical link is selected:
Set the following parameters:
•
Transport Layer
: TCP Server, TCP Client, UDP, UDP Broadcast.
>
“
TCP Server
”
requires a client to establish the connection to the BFU software.
>
With
“
TCP Client
”
, the address specified is that of the server which sends or receives
data. The BFU software will establish the connection to the server.
>
With “UDP”, the address specified is that of the terminal which sends or receives
data. The specific terminal will need to send or listen to data from the BFU software.
>
With “UDP Broadcast”, the address specified is a broadcast address limited to the
subnet mask. For example, if the subnet mask is 255.255.0.0 and the system IP is
192.168.16.9, the broadcast address will be 192.168.255.255. All connected
terminals will be able to receive the same data simultaneously by opening the same
port to listen to data.
•
IP
: IP address of the target (only used in UDP and TCP client)
•
Port
: port socket number
>
You can select any 4-digit number above 1024 as the port number.
Important
To prevent conflicts with other systems or applications, it is important that no identical
numbers are used and that reserved ports are not used.
