background image

SeapiX 

  Installation Manual

 

 
 

SSD-C-1306  Ed. A 

 01/2020

 

4

 

Warranty  

iXblue  provides  a  standard  warranty  of  two  (2)  years  covering  this  product  against  any 

defect in materials or manufacture. The warranty starts from the date of the product received 

at the customer’s location. In the event that a defect in materials or manufacture becomes 

obvious during the stipulated warranty period, iXblue will undertake, at its sole discretion, 

either to repair the defective product, bearing the cost of all parts and labor, or to replace it 

with an identical product. 

In  order  to  avail  itself  of  this  warranty,  Customer  must  notify  iXblue  of  the  defect  before 

expiry  of  the  warranty  period  and  take  all  steps  necessary  to  enable  iXblue  to  proceed. 

Customer shall be responsible for the packaging and the shipment of the defective product 

to the repair center notified by iXblue, the cost of such shipment being borne by Customer. 

iXblue 

agrees to bear the cost of return freight, based on CPT (Cost Paid To) Customer’s 

airport location, import tax-free. 

This warranty shall not be construed as covering defects, malfunctions or damages caused 

by improper use or inadequate maintenance of the product. Under no circumstances shall 

iXblue  be  due  to  provide  repair  or  replacement  under  this  warranty  in  order  a)  to  repair 

damage caused  by work done  by any  person  not representing  iXblue for the installation, 

repair  or  maintenance  of  the  product  ;  b)  to  repair  damage  caused  by  improper  use  or 

connection to incompatible equipment, and specifically, the opening of the housing of the 

equipment  under  warranty  shall  cause  the  warranty  to  be  automatically  cancelled  ;  c)  to 

maintain any product that has been modified or integrated into a larger configuration, if such 

modification  or  integration  increases  the  duration  or  difficulty  of  the  maintenance  of  said 

product ; d) the operating defect is caused by an intervention or as a result of a modification 

that  was  performed  without  iXblue  prior  consent  ;  e)  the  failure  was  caused  by  normal 

deterioration (wear and tear) of the product, or by negligence or by improper care on the 

part of the Customer. 

This warranty covers the product hereunder and is provided by  iXblue in place of all and 

any other warranty whether expressed or implied. iXblue does not guarantee the suitability 

of the product under warranty for sale or any specific use. iXblue

’s liability is limited to the 

repair or replacement of defective products, this being the sole remedy open to Customer 

in  the  event  the  warranty  becomes  applicable.  iXblue  cannot  be  held  liable  for  indirect, 

special,  subsequent  or  consequential  damage,  irrespective  of whether  iXblue  has  or  has 

not  received  prior  notification  of  the  risk  of  occurrence  of  such  damage.  The  repair, 

replacement or re-performance of parts of defective  product shall not cause the warranty 

period mentioned above to be extended, to the exception of the said replaced, repaired or 

re-performed  parts  for  which  a  3  month  warranty  period  is  granted  from  shipment  to  the 

Customer of the replaced or repaired product part. 

 

 

Summary of Contents for SeapiX



















































































Reviews: