iXBlue SeapiX Installation Manual Download

Page: 20 / 82

SeapiX

–

Installation Manual

SSD-C-1306 Ed. A

–

01/2020

SeapiX Pack

3.1

Pack Contents

The shipping pack contains a Packing List detailing all delivered items. This Packing List

has been completed and checked for by iXblue shortly before shipment and should match

the content of the pack that you have received.

CAUTION: PACK NON-CONFORMITY OR DAMAGE

It is recommended to check the content of the pack and all equipment items immediately

after reception. Specifically, you should check that all items referred to in the Packing List

are present and that none has sustained damage.

If you observe any non-conformity or damage, please inform the carrier and iXblue

without delay by certified mail describing in detail the problem encoutered.

Example of a SeapiX Packing List

Summary of Contents for SeapiX



















































































Search results

Summary of Contents for SeapiX

Reviews:

Related manuals for SeapiX

Brands by name

Popular brands

iXBlue SeapiX, Installation Manual

Search results

Summary of Contents for SeapiX

Reviews:

Related manuals for SeapiX

Brands by name

Popular brands