OCEANO RT2500S/RT5000S Series – User Guide
System:
RT8x1
Preventive Maintenance
Sub-system
:
Reference:
PM02
Page:
1/2
Subject: Replacing Batteries
Frequency:
see section IV
Duration:
20 minutes
Power supply is made of 3 banks of 6 ‘D’ size cells (main power supply) and one backup
cell 9 V, 6LR61 located in a plastic box beside the lower end plate assembly.
Either Alkaline of Lithium cells can be used in the main battery package with no additional
wiring or reconfiguration of the instrument, but not mixed. Default battery setting is with
Alkaline.
Battery life depends on the operation of the instrument and is described in user manual.
The backup battery is only used as a safety feature.
It allows the listening circuits of the instrument to work for a few months after the main
battery bank is flat, and several release operation to be carried out.
A
FTER REPLACING BATTERIES OR SWITCHING THE TRANSPONDER
OFF
AND
ON
(
IF APPLICABLE
),
THE TRANSPONDER RETRIEVES THE CURRENT CONFIGURATION MEMORIZED IN THE DEVICE
'
S
EEPROM.
None
Step
Action
1.
Prepare 18 off fresh cells and individually check them before installing them into the
instrument.
2.
Remove the 4 securing screws from the printed circuit board to gain access to the 3
battery banks.
Equipment
Precaution
Preliminary
Steps
Procedure
MU–RT8x1–AN–001 Ed. M – September 2013
36
Summary of Contents for OCEANO RT2500S Series
Page 1: ...OCEANO RT2500S RT5000S Series LF Transponders User Guide...
Page 2: ......
Page 10: ......
