GAPS
-
User Guide
4.4.2.2
Configuration Procedure
The configuration procedure of output data is detailed in this section.
1.
Click on the
INSTALLATION > OUTPUTS
menu.
2.
Click on the port of your choice:
Serial A, B, C, D
or
Ethernet A, B, C, D
.
The selected port is highlighted in blue. According to the type of link, the Serial or Ethernet
component appears below.
3.
In
Protocol
, select a
Protocol
and a
Frequency
if necessary:
4.
If you have selected a
Serial link
, enter the parameters of this link:
5.
If you have selected an
Ethernet
link, enter the parameters of the link:
6.
Click on
OK
to validate your output configuration positioning data.
72
MU-GAPS-AN-005-H - November 2019
Summary of Contents for GAPS
