background image

63

Ma
in

te

n

an

c

e

Inspection

(UURUPHVVDJHV

Take measures below when any of the error messages appears during operation. Contact us 
or your nearest distributor as necessary.

Error messages

Possible causes

Measures

  The pressure overload protec-

tion is active.

 •  Check a discharge line for clogging and re-

move it as necessary. If this error happens dur-

LQJWKHWUDQVIHURIKLJKYLVFRVLW\OLTXLGPDNHD

discharge line I.D. wider and its length shorter. 

The diaphragm unit is broken.

 •  Replace the broken diaphragm set with the new 

one. See page 67 for detail.

Rotation control is failed.

 •  If this error state is removed by pushing the 

start/stop key, a possible cause is an instanta-
neous surge of discharge line pressure. In-
spect/solve the problem and then restart.

 •  If not, the failure of a motor rotation detector is 

possible. Contact us or your nearest distributor.

,QVSHFWLRQ

Perform daily and periodic inspection to keep the best pump performance and safety.

Daily inspection

Check the following points. If you notice any abnormal or dangerous conditions, suspend operation 
immediately and inspect/solve problems. See the "Troubleshooting" section as necessary.
When wear parts come to the life limit, replace them with new ones. Contact us or your distributor for detail.

No.

States

Points to be checked

How to check

1

Pumping

‡,IOLTXLGLVSXPSHG

Flow meter, pressure 
gauge or visual inspection

• If discharge pressure is normal.

Pressure gauge

•  

,IOLTXLGLVGHWHULRUDWHGFU\VWDOOL]HGRUVHWWOHG

Visual or audio inspection

2

Noise and vibration

•  If abnormal noise or vibration occurs. They are 

signs of abnormal operation.

Visual or audio inspection

3

Entrained air from the 
pump head joints and 
the suction line

• If leakage occurs.
•  

,ISXPSHGOLTXLGLQFOXGHVDLUEXEEOHVFKHFNOLQHV

for leakage and retighten as necessary.

Visual or audio inspection

Periodic inspection

Retighten the pump head mounting bolts evenly to the following torque in diagonal order.

* Mounting bolts may loosen in operation. How fast the bolts start to loosen is depending on operating conditions.

7LJKWHQLQJWRUTXH

Model code

7RUTXH

Bolts

Number of bolts

IX-B007/-B015/-B030/-B045

3 N•m

M5 hexagon head bolt

4

shows up 

in turn

Summary of Contents for Hi-Techno IX-B Series





























































































Reviews: