40
3HUIRUPDFDOLEUDWLRQ
3HULRGLFDOO\PDNHFDOLEUDWLRQWRPRQLWRUDQDFFXUDWHÀRZWKURXJKFRQWUROGLVSOD\
The pump is calibrated by pumping clean water at the maximum operating pressure before
shipping (in the absence of a designation by a user), however, make calibration again in an
actual operating condition as necessary. Follow the calibration process on the next page.
NOTE
7KHÀRZUDWHVKRZQRQWKHVFUHHQLVDFDOFXODWHGYDOXHEDVHGRQFDOLEUDWLRQDQGLVQRWDQDFWXDOÀRZUDWH
&DOLEUDWLRQLVPDGHWRGHWHUPLQHOLTXLGYROXPHSHUVKRW$UUDQJH\RXUSLSLQJV\VWHPDFFRUGLQJWRWKHJXLGH
below to ensure the calibration is made correctly.
6XJJHVWHGSLSLQJOD\RXW
Use a calibration cylinder connected to a suction line.
%DGH[DPSOH
'RQRWLPPHUVHDFDOLEUDWLRQWXEHLQWROLTXLGLQDFDOLEUDWLRQF\OLQGHU7XEHYROXPHLVDGGHGWRWKHOLTXLGYROXPH
to be measured, and calibration will be upset.
Perform a calibration
Accumulator/Chamber
Pump
Relief valve
Air vent valve
Back pressure valve
Calibration
cylinder
Tank
Pressure gauge
Before calibration
Pump
After calibration
Calibration cylinder
7XEHLQOLTXLG
Calibration
cylinder
Tank