![background image](http://html1.mh-extra.com/html/ivt/csd-12/csd-12_manual-instruction_2097756010.webp)
10
Manual instruction
EN
operator from the safety instructions and safe
working practices given in this manual.
• The main voltage must correspond to the one
marked on the technical data plate. Do not use
other sources of power.
• Before inserting the plug in the main socket,
make sure that the socket ratings are correct and
correspond to those indicated on the rating label on
the appliance.
• Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and refrigerators.
This increases risk of electric shock if your body is
grounded.
CAUTION: touching electrified parts
may cause death by electric shock or
burn.
• Never move the appliance by pulling at the
cables.
• Do not abuse the cord. Keep it away from heat,
oil, sharp edges or moving parts.
• Always guide the connection line safely.
• Do not use power tools near flammable liquids
or gases.
• Always disconnect the appliance from the mains
supply before transporting it to other places.
CAUTION: The appliance should always
be switched off at the mains before
disconnecting any plug and socket
connector or extension cables.
• Never pass the appliance over the extension
cable while the tool is working. Make sure you
always know where the cable is.
• Do not wire an extension cable directly into your
device yourself. Instead, take the device to your
nearest authorized Service Centre.
ATTENTION! DANGER OF ELECTRIC SHOCK!
Consider working area environment. Do not expose
power tools to rain. Do not use power tools in
damp or wet locations. Keep work area well lit and
dry. Try to prevent the device from getting wet or
being exposed to humidity. Do not leave it outside
overnight. Water entering a power tool will increase
the risk of electric shock.
• The power supply cable should be checked
regularly and, before using it, make sure the cable
is not damaged or worn out. If the cable is not in
good condition, do not use the appliance; take it to
an authorized service centre.
• When tool is used outdoor, only use an extension
cable that is suitable for outdoor work and which is
marked for this specific use. Keep it away from the
working area, from damp, wet or oily surfaces and
away from heat and fuels.
• Avoid any accidental starting: make sure the
switch is “off” before plugging it in.
• Remove adjusting keys or wrenches before
turning the tool on.
• Do not use the tool if the switch does not turn
ON or OFF. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
WARNING!
During the use of the tool,
some dust containing chemicals known
to cause cancer, may occur. Some of these
chemicals are: lead from lead based paints,
crystalline silica from bricks and cement and other
masonry products, arsenic and chromium from
chemically treated lumber and other dangerous
products. If dust is present, your risk from these
exposures varies, depending on how often you do
this type of work.
To reduce your exposure to these
chemicals, any time you do pulverulent operations,
work in a well ventilated area and work with
approved safety equipment, such as dust masks
that are specially designed to filter out microscopic
particles.
• If the appliance strikes a foreign body, examine
the device for signs of damage and carry out any
necessary repairs before restarting and continuing
to work.
• If the appliance starts to vibrate abnormally, turn
it off and check for the cause immediately. Vibration
is generally a warning of trouble.
• Always switch off the appliance and wait until
the device completely stops whenever you leave the
machine, before carrying out maintenance, before
checking, cleaning or working on the appliance.
• Wear suitable working clothes, long trousers
and solid shoes. Do not operate the appliance when
barefoot or wearing open sandals.
• Use safety equipment!
• It is forbidden to move or modify any of the
internal parts of the device.
Specific safety rules
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create risk of fire when used
with another battery pack.
• Use power tools only with specifically designated
battery packs. The use of any other battery packs
may create risk of injury and fire.
Summary of Contents for CSD-12
