ITT Goulds Pumps V 3298, Installation, Operation And Maintenance Instructions

Page: 12 / 148

NAMEPLATE INFORMATION
Every pump has two Goulds nameplates that provide
information about the pump. The tags are located on the
casing and bearing frame. When ordering spare parts, you will need to identify pump
model, size, serial number, and the item number of required
parts. Information can be taken from the pump casing tag.
Item numbers can be found in this manual
12
3298 Family Rev. 4/07
Description
Fig.
No. Example
Pump Casing Tag
- provides information about
the pump’s hydraulic characteristics.
Note the format of the pump size:
Discharge x Suction - Nominal maximum
Impeller Diameter in inches
(Example: 2x3-8)
(Figs. 1 & 2).
Fig. 1
English
Fig. 2
Metric
Bearing Frame Tag
- provides information on
the lubrication system used (Fig. 3).
Fig. 3
ATEX Tag
- If applicable, your pump unit may
have the following ATEX tag affixed to the
pump and/or baseplate. See the
Safety section for
a description of the symbols and codes (Fig. 4).
Fig. 4