manualshive.com logo in svg

Italkero Poster PE t1 30, Installation And Technical Manual

Share
Download
Italkero Poster PE t1 30 Installation And Technical Manual Download Page 45

user

-Electrical Hazard:  Do not touch the con-
vector with wet feet or other part of your

body.

-Do not touch the grill when hot air is com-
ing out.

-To reduce the risk of injury, always unplug
this machine before performing any mainte-

nance to it, such as cleaning any part of the con-
vector. Never disassemble this machine, or try to do
any maintenance, which has not been recommend-
ed by this manual.  

-Do not pull, take apart, or wring the
electrical cable that is outside of the con-

vector.

-Do not put objects on top of the convec-
tor this will cause a malfunction or seri-

ous damage to the convector.

SECURITY RULE

When using a product with combustion or
electrical energy, always follow basic safety
precautions to reduce the risk of injury. 

Read this manual carefully to learn its use and
limitations as well as potential hazards associ-

ated with its use. It prohibited to children and dis-
abled persons the use of the convector.

Do not use this product in the presence

of an explosive atmosphere (gaseous

fumes).
In this case:

-Open the doors and windows.
- Close the combustion device.
- Call the Technical Service 
Authorized for assistance.
-Children and persons who do not 
have adequate knowledge of this 
product are prohibited from using 
this product.  Keep children away.

5

Summary of Contents for Poster PE t1 30

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands