Italkero Poster PE t1 30, Installation And Technical Manual

Page: 20 / 56

Group adapter connection tube
The group adapter preparation is effected by two
kinds of tubes Ø 32/54 mm
-- With Ø 32 mm tubes.
- Adapt the length tube; to the wall space so it
increases 25 mm, then cut it.
- Assemble the tube (1) cute at right measure, and
the curve (2) for the adapter connection (3) then
fasten with the furnished screws.
The unloaded tube has to be toward up and in corre-
spondence to the shortest outside tube of the adap-
ter connection.
- Assemble the unique terminal (4) on the tube (1)
fastening with the furnished screws in the way that
extremity tube appears at line of the terminal but-
tonhole.
- Take off the paper mask from the template, insert
the assembled group in the wall positioning in the
way that the tube extremity is at line to the outside
wall, then fasten the connection adaptor to the tem-
plate with the furnished screws.
-- With Ø 54 mm tubes
- Adapting the length tube; to the wall space so it
increases 25 mm, then cut it.
- Open the group adepter connections disassemble
the two flanges (1) unscrew the screws (2) take off
the reductions (3 only for the 0 32mm tubes) then
assemble the group.
- Assemble the unique terminal (4) to tube (5).
The cut has to be perpendicular to the axe
tubes, being real careful don
ʼ t deform.
At the cut, take away real carefully the featheredge,
after make the fastening holes.
+25
mm
L
L
3
2
1
4
1
5
2
4
1
5
2
4
3
6
20
INSTALLATION