Italkero Poster PE t1 30, Installation And Technical Manual

Page: 14 / 56

14
INSTALLATION
GENERAL INFORMATIONS
This apparatus is tin respect to the environment; the
air is intake from the outside.
-When the convector is being installed do not use
other pieces that are not give from the manufacturer.
-Don
ʼ t let the electrical cable touch heated parts, like
the grill or the intake & exhaust tubes.
Is the installation duty to tell the owner the behaviour
to keep during the apparatus function.
- To avoid problems don
ʼ t place cloth or other things
on top of the grill.
-Don
ʼ t block with cloths or rug the apparatus intake &
exhaust tubes.
APPARATUS CHOICE LOCATION
Before you ʼ re going to install the convector, check if
there is enough space for the correct function of the
convector.
Check if around the convector tubes there are mate-
rials that can support the heath, second check if the
wall is made of the right material and can support the
convector weight.
Verified if around the exhaust fumes tubes, there is
no wood or plastic but there is the right material that
can support the heath.
The material where the convector it going to be pla-
ced has to resist the exhaust tube heath (about
180°C).
In case of low resistant wall material it ʼ s possi-
ble to realize a cavity around the exhaust fume
tube, and insulate with strong material for the pre-
sent temperature, otherwise execute a hole with a
larger diameter at least 4 cm respect to the exhaust
fume tube.
Its prohibited settles the convector in rooms like
bath, or showers. For this installation you need
to realize special protections that make the appara-
tus consistent to the Electrical security rules.
INSTALLATION
Min.
150
Min.
150
Min.
50