FITTING THE REMOTE DIGITAL CONTROL
For correct installation of the remote control in the
required position, follow these instructions:
- Choose the position of the remote control:
- away from the appliance;
- on the BASE (provided).
- Install the remote control.
To ensure correct operation, install the remo-
te control at a MAX distance of 6 metres.
- Remote control away from the appliance
This solution makes it possible to read the perfect room
temperature for comfort. In fact in this position, the
remote control “feels” the temperature at human height.
To ensure correct operation, install the remo-
te control at a height off the floor between
MIN 1m and MAX 1.5m.
Installation:
- choose the position;
- open the remote control, fit the batteries and check:
- Display unit operation
- range of action (see User Sect.)
Check the range of action:
A) If the LED flashes 4 times a second, reception
is correct.
B) If the LED flashes slowly, you are at the limit of
the range of action.
C) If the LED does not flash, you are outside the
range of action.
- mark the position of the fastening holes on the wall
and drill;
- fit the screw anchors and screws most suitable for
the chosen wall;
- fasten the rear part of the remote unit to the wall;
- assemble the front part with Display unit.
- Remote on the BASE (provided)
This solution makes it possible to avoid fastening to
the wall and interfering aesthetically with the place of
installation.
To ensure correct operation, position the
control away from heat sources, sunrays,
heated surfaces and open transit areas.
Installation:
- choose the position;
- open the remote control, fit the batteries and try:
Display unit operation
range of action (see User sect.)
Checking the range of action:
A) If the LED flashes 4 times a second, reception
is correct.
B) If the LED flashes slowly, you are at the limit of
the range of action.
C) If the LED does not flash, you are outside the
range of action.
- fasten the rear part of the remote control on the base;
- assemble the front part with the Display unit.
24
INSTALLER
MIN 1m
MAX 1,5m
112
72
3,5
7
60
23,5
60
Summary of Contents for faro
Page 1: ......
Page 40: ...3520300031 Rev 2...
