-Chance A1 (with tube Ø 54 mm)
For the unloaded & intake tube installation:
-Mark the centre (
A
) execute the hole
B
for the (Ø 65
mm) for the tube Ø 54 mm.
- check the correctness and the length of the
path described by the pipes (extraction and
exhaust) to be recessed in the wall.
-Execute trace in the wall for the tube.
Before you wall up the tubes, provide to
insulate the exhaust fume tubes, with strong
materials resistant at a greater temperature of
200 °C (ex. HT/-Armaflex).
Group adapter connection tube
The group adapter preparation is effected by two
kinds of tubes Ø 54 mm
-- With Ø 54 mm tubes.
- Adapt the length tube; to the wall space so it
increases 25 mm, then cut it.
- the adapter connection unit is already fitted on the
top part of the appliance and does not require any
type of further assembly or adjustment.
- fit the curves/pipes on the connection as far as they
will go.
Make sure the pipes have been correctly fit-
ted in the adapter connection and that the
O-rings do not protrude from their seats, for
pipes featuring seal.
- Assemble the unique terminal (2) to tube (1).
The cut has to be perpendicular to the axe
tubes, being real careful don
ʼ
t deform.
At the cut, take away real carefully the featheredge,
after make the fastening holes.
+25
mm
L
2
1
+25mm
Ø 54
20
INSTALLER
A
B
Summary of Contents for faro
Page 1: ......
Page 40: ...3520300031 Rev 2...
