Il presente manuale è di proprietà di
ogni riproduzione, anche parziale, è vietata.
LEO Instructions
Edition:
01/2016
- Revision:
01/16
General instructions and warnings
Operating modes
Installation and commissioning
The machine installation and are only permitted to authorised personnel.
During installation, handle the machine parts as indicated in this manual.
The installation area for the machine must, as far as possible, be free of materials that may
prevent or limit visibility.
Check that all machine interlock and safety devices are properly secured and that there are
no mobile or loose parts. Also check that the control unit components are intact.
Check the consistency between the power supply voltage indicated on the CE plate and the
voltage value of the mains distribution network.
Check that the safety guards are properly installed and perfectly efficient.
Press the EMERGENCY button (A) to stop the machine in emergency situations.
The machine safety is not guaran teed if its safety device B is removed, by-passed
or tampered.
3
1 - 09
Manual operation
The manual operation can only be carried out by authorized personnel.
Authorized personnel must be trained especially in relation to the operating procedures to be
followed, the hazard situations that may arise and the correct ways to avoid them.
During these operations, personnel must always work with extreme caution and paying the
utmost attention.
A
B
