ItaldibiPack Leo Instruction Manual Download Page 8

Page: 8 / 49

Il presente manuale è di proprietà di

ogni riproduzione, anche parziale, è vietata.

LEO Instructions

Edition:

01/2016

- Revision:

01/16

1 - 06

General instructions and warnings

General notes for machine delivery

When the machine reaches your site, check that:

- The supply is in compliance with the order specifications.
- There is no visible damage due to transport or other causes.
(In the case of damage or missing parts inform the shipping agent or

ITALDIBIPACK

S.p.A.

immediately and provide a detailed account of the damage).

FOR ALL REQUESTS TO

ITALDIBIPACK S.p.A.

OR OUR SERVICE CENTRES, ALWAYS

QUOTE THE MACHINE TYPE, SERIAL NUMBER AND YEAR OF PRODUCTION.

Testing procedure

The machine is tested by the manufacturer

at the time of assembly.

Warranty

The machine warranty conditions are
attached to this manual.

Summary of Contents for Leo


















































Search results

Summary of Contents for Leo

Reviews:

Related manuals for Leo

Brands by name

Popular brands

ItaldibiPack Leo, Instruction Manual

Search results

Summary of Contents for Leo

Reviews:

Related manuals for Leo

Brands by name

Popular brands