Il presente manuale è di proprietà di
ogni riproduzione, anche parziale, è vietata.
LEO Instructions
Edition:
01/2016
- Revision:
01/16
Upon machine arrival,
ensure it has not been
damaged.
If all is in order, remove
the cardboard or plastic
protecting the machine.
When you move the pallet
where the robot is located
DO NOT cut the strap that
block it.
Pay particular attention
when unpacking as the
machine is also made of
plastic parts that are not
resistant to violent impacts.
The pallet wrapper robot LEO is shipped fully assembled and se cured to the pallet with appro
-
priate strapping.
Cut the strap to free it from the pallet.
Ground movement and positioning
To lift and move the machine still positioned on
the pallet, insert a Ø 20 mm bar in the hole indi
-
cated by the arrow in Figure 12 and lift it using a
forklift as indicated in Figure 12.
INSTALLATION
Machine unpacking
a
CAUTION
The machine must be lifted and handled by qualified technicians and
authorized to perform these operations.
Move body and hands away when the machine is lowered.
Failure to observe these instructions may cause serious injury.
WARNING
Always perform unloading and handling operations using lifting means with
adequate capacity to the weight of the machine.
4 - 01
12
11
10
