Il presente manuale è di proprietà di
ogni riproduzione, anche parziale, è vietata.
LEO Instructions
Edition:
01/2016
- Revision:
01/16
5 - 02
USING THE MACHINE
continued
Program settings
PROGRAM PARAMETERS CHANGE
Press
ENTER
to access the screen :
MENU
: programmi - tempi -
lingua (programs - times - language).
Press
or
to move the cursor
▸
in correspondence of
“programmi” (programs).
Select the program by pressing
or
to move the cursor
▸
in
correspondence of the number of the program chosen.
Press
ENTER
to access the sub-menu indicated by the symbol
▸
.
Use the buttons
or
to modify the values.
Once modified, Press
ENTER
to confirm the new value.
Press
ESC
to exit
CAUTION: To use the machine, the display must be in the home screen.
PROGRAM SUB-MENU
Allows recalling the program to change the settings.
Select a chosen program number and press
ENTER
to confirm.
The following will appear on the display:
▸
HORIZ. V)
- Not modifiable - Value 99
▸
VERTICAL V
- Modifiable - it is the up and down speed of the film roll holder carriage.
Changing the value the overlapping of the film increases or decreases. Recommended
value 90.
Pressing
twice the following increases or decreases words appear on the display:
▸
HEIGHT
- Modifiable - The entered value is the pallet height in cm.
If the value is greater than the real height the machine uses the photocell, otherwise, the
film roll holder carriage movement stops at the set value.
The entered value divided by 2 is used to make a reinforcement cycle at the wanted height
and, in this case, the
AVERAGE
value in the sub-program
RIPETIZIONI (REPETITIONS)
is different from
0
.
Maximum value 235
.
▸
DOWN
- Modifiable - Allows performing an up-down cycle of the film roll holder carriage or
only up-cycle.
Values:
YES - NO
. In the case of
NO
, when the cycle is completed the film roller holder
carriage stops in the top position. To move it in home (down) position press
more
time to avoid that take high speed.
Only when it is in home position it is possible to restart with a new cycle.
