Isotech PEGASUS PLUS 1200 B, Handbook

Page: 20 / 50

PEGASUS
PLUS
1200
HANDBOOK
ISSUE 5 - 01/05
Page 20 of 50
Check that any sensor placed into the Pegasus is suitable for the temperature range. Sensors
can be damaged if taken outside their normal operating limits.
The desired sensor type is easily set, press the Scroll key until the upper display indicates,
inPt
On the upper display. The lower display will show the current set sensor type,
J.tc J thermocouple
K.tc
K thermocouple
L.tc
L thermocouple
r.tc R thermocouple (Pt/Pt13%Rh)
b.tc
B thermocouple (Pt30%Rh/Pt6%Rh)
n.tc
N thermocouple
t.tc T thermocouple
S.tc
S thermocouple (Pt/Pt10%Rh)
PL.2
PL 2 thermocouple
rtd 100 platinum resistance thermometer.
T012
E thermocouple
Again the value can be modified with the UP and DOWN keys.
Enabling / Disabling Custom Calibration
Custom calibration allows the indicator to be programmed to suit a particular temperature sensor.
This allows the indicator to automatically show the true temperature, without having
to manually apply a correction.
When the Custom or User Calibration is active the indicator will show the REM beacon
lit continuously. The use of User calibration can make a significant difference to the
accuracy of the instrument, and this REM beacon provides a clear and continuous indication of
the calibration sta tu s. Isotech will configure and set user calibration when the Dry Block is
ordered with a temperature sensor.
To alter the calibration status press the Scroll key until the upper display shows,