page 56
BC-3000 • User’s Manual • Rev 0
5.11 Programming Department Codes and Names
Departments are used to link similar products together into a category for report purposes. The following steps
show how to program a name for the reference code entered when PLUs are programmed.
Step
Description
Keys and Display
9
➔
0
0
0
MODE
1
➔
5
PLU
ENTER
Dept. Name
(See Chapter 6)
ENTER
END
1
•
Access the Programming mode.
Ex. Password = 9000
Note: To exit the Programming mode, press the
MODE key again.
2
•
Enter “10” followed by the ENTER key, or
press the DEPT. key to select the Department
Programming mode.
3
•
Enter the department code followed by the
PLU key.
Ex. Department Code = 15
4
•
Press the ENTER key to create/edit the
department name.
5
•
Enter the required department name using
the keyboard (max. 12 characters).
•
When complete press the ENTER key.
6
•
Repeat steps 3 through 5 for any other
departments to be programmed.
7
•
When all desired departments have been
programmed, press the END key.
8
•
Press the MODE key to return to the normal
mode.
0
1
➔
ENTER
DEPT.
OR
MODE
