BC-3000 • User’s Manual • Rev 0
page 41
5.1
Programming PLUs
This section explains how to program a product (PLU) in the BC-3000.
Some steps listed below may not be available. At the time of installation the BC-3000 may be configured to
bypass unused steps.
Note: Confirm that the Program Key Sheet, and not the Operation Key Sheet, is being used for this operation.
1
•
Access the Programming mode.
Ex. Password = 9000
Note: To exit the Programming mode, press the
MODE key again.
2
•
Enter “1” followed by the ENTER key, or press
the EDIT PLU key to select the PLU
Programming mode.
3
•
Enter the PLU number (Max. 6 digits) to be
created or edited followed by the PLU key.
Ex. PLU No. = 123456
4
•
To edit or create the PLU name at this point,
press the EDIT key.
5
•
Enter the desired PLU name using the
keyboard.
Note: For text editing, refer to Chapter 6.
•
After entering the text, press the ENTER key.
6
•
Press the ENTER key.
Note: If confirmation of the entered PLU
number and name is necessary, press the
PRINT key.
7
•
Select the product type, then press the
ENTER key.
0 = Weighed item
1 = Fixed-price item
Ex. Weighed Item
9
•
Press the ENTER key.
Step
Description
Keys and Display
0
9
0
0
➔
MODE
2
3
1
5
4
6
➔
PLU
EDIT
PLU Name
(See Chapter 6)
➔
0
1
➔
EDIT
PLU
OR
ENTER
ENTER
ENTER
ENTER
ENTER
