BC-3000 • User’s Manual • Rev 0
page 21
Ex. Access PLU10
Ex. Access PLU90
PLU10
PLU90
PLU10
PLU90
LOWER
PRESET
➔
PRE
PACK
5
0
3
PLU
➔
Ex. PLU No. = 350
2.5
Prepack for Sales by Weight
1
Enter the prepack mode.
•
Press the PREPACK key to enter the prepack mode.
•
The AUTO indicator lights.
2
Check that the weight display reads zero.
•
Make sure that nothing is on the weigh platter and check
that the ZERO indicator is lit.
•
If not, press the ZERO key.
3
Subtract the tare.
■
Weighing tare
•
Place the tare on the weigh platter. The tare weight will be
displayed.
•
Press the TARE key.
The displayed value will return to zero, and the NET
indicator will light.
■
Fixed tare weight
•
Enter the tare weight and press the TARE key.
■
Tare look-up key
•
Press the tare look-up (preset) key.
4
Enter the PLU.
■
PLU number entry
•
Enter the PLU number and press the PLU key.
■
PLU (preset) key
•
Press the preset key in which the PLU item data is set.
Note:
Refer to page 22 when using the Save Function.
5
Weigh the item.
•
Place the item on the weigh platter.
•
The label is automatically printed.
•
Repeat this step until all the items are weighed.
6
Exit the prepack mode.
•
Press the PREPACK key.
•
The AUTO indicator turns off.
PRE
PACK
ZERO
AUTO
ZERO
TARE
NET
Ex. Tare Weight= 0.08 lb.
TARE
8
➔
TARE
#1
Ex. Access Tare #1
