manualshive.com logo in svg

ISHIDA BC-3000, Operating Manual

Share
Download
ISHIDA BC-3000 Operating Manual Download Page 17

BC-3000 • User’s Manual • Rev 0

page 17

2.1

Pre-operation Inspection

In order to maintain optimum scale performance, perform the following inspection before starting daily operations.

OFF

Thermal Head

Caution

Do not use metal tools to clean the thermal head as they may damage
the head surface.

Caution

Always turn off the power switch when performing this inspection.

 1.

Make sure that the power is off.

 2.

Check that the scale and the level device aperture are clean and free of foreign matter.
If not, wipe any soiled areas with a dry cloth.

 3.

Clean the thermal head with a cotton swab at least once a week in order to maintain print quality.

Dip the end of the cotton swab into cleaning fluid and wipe the thermal head.

 

4.

Remove any foreign matter, label adhesive, etc. to make the scale level.

 5.

Adjust the scale to level by using the height adjustment feet.

 6.

Make sure the label/paper amount is sufficient.

Level Indicator

Hight Adjustment

Correct

Incorrect

Summary of Contents for BC-3000

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands