ISHIDA BC-3000 Operating Manual Download

Page: 34 / 80

page 34

BC-3000 • User’s Manual • Rev 0

4.3.2 Operation Procedure

Step

Description

Keys and Display

•

Access the Total mode.

Ex. Password = 8000

•

Press number “2” followed by the ENTER key
to access the Total Report menu.

•

Press the ENTER key to access the Report
Category.

•

Press the UP or DOWN key to select the
desired Report Category.

F02-01-01 = Daily Sales Total
F02-01-03 = Daily Item
F02-01-04 = Daily Dept.
F02-01-05 = Daily Group
F02-01-06 = Daily Designated PLU Total
F02-01-07 = Daily Profit Total
F02-01-08 = Daily Department Total
F02-01-09 = Daily Group Total

•

Press the PRINT key.

•

Repeat steps 4 and 5 for any other reports.

•

Press the END key to retur n to the main
menu.

•

Press the MODE key to return to normal
operation.

➔

MODE

➔

ENTER

Select Report Category

PRINT

END

MODE

Note: Particular reports can be obtained by using the following speed keys.

GRAND

TOTAL

PRICE

OVRDE

GRAND TOTAL
Used to immediately print the Daily Department Total while in the Total mode.

PRICE OVERRIDE
Used to immediately print all items with changed unit prices while in the Total mode.

➝

Summary of Contents for BC-3000

















































































Search results

Summary of Contents for BC-3000

Reviews:

Related manuals for BC-3000

Brands by name

Popular brands

ISHIDA BC-3000, Operating Manual

Search results

Summary of Contents for BC-3000

Reviews:

Related manuals for BC-3000

Brands by name

Popular brands